Laserfiche WebLink
i <br /> I <br /> I <br /> I <br /> I <br /> MCAT - 4/10/2012 Control Room Concerns <br /> 1. OnAir switch and light do not function as intended. <br /> Solution proposed; Charge audio preamplifier(Mic Amp) power input to OnAir switched outlet <br /> and inform operators of the change in procedure. IE, used OnAir switch to activate the <br /> microphones instead of the volumes down. Note that upon restoring the power to the <br />� <br /> mics,the individual push-buttons must be activated. <br /> I <br /> I . <br /> . Need a list of uniform procedures for shut-down. When an operator is starting the system the <br /> chairman signals that they are reader t ""Go Lige." However if the system was shut down <br /> improperly it may take the operator some time to get the system up and running properly.This <br /> I <br /> is frustrating to the committees and embarrassing to the operators. <br /> . Over Air volume. It is my opinion that the audio volume setting on our modulator is set too high. <br /> I <br /> The sound level on our channel is far greater than that of all adjacent channels.This can be set <br /> in our control room or possibly at the head end. <br /> Submitted by: A. Eliasnn <br />