Laserfiche WebLink
a <br /> i <br /> L <br /> i ' <br /> ' RADIOFREQUENCY (RF) ENGINEER - An engineer specializing in electrical or <br /> microwave engineering, especially the study of radiofrequencies. <br /> { RADIOFREQUENCY RADIATION (RFR) -The emissions from personal wireless service <br /> facilities. (Regulated by the FCC"Guidelines for Evaluating the Environmental Effects <br /> of Radiofrequency Radiation'. <br /> ` SECURITY BARRIER - A locked, impenetrable wall, fence or berm that completely <br /> seals an area from unauthorized entry or trespass. <br /> j SEPARATION -The distance between one carrier's array of antennas and another <br /> carrier's array. <br /> J ' C. Permit process. <br /> A personal wireless service facility shall require a building permit in all cases and may be <br /> ,1 permitted as follows: <br /> (1) A personal wireless service facility may be located on any existing guyed tower, <br /> [ lattice tower, monopole, electric utility transmission tower, fire tower or water tower, <br /> n provided that.the installation of the new facility does not increase the height of the <br /> existing'structure except as provided in Subsection E.(5) below. Such installations <br /> shall not require a special permit but shall require plan review (PR) approval by the <br /> town under the provisions of Subsection 174-24B. <br /> (2) Otherwise, no personal wireless service facility involving construction of one or more <br /> ground or building (roof or side) mounts shall be located in the town except upon <br /> issuance of a special permit by the Planning Board under the provisions of <br /> Subsection 174-24(C) and of this section. <br /> (3) A personal wireless service facility that exceeds the height restrictions of <br /> Subsections E.(1) through (5) may be permitted by special permit, as specified in <br /> Subsection C.(2), in a designated Wireless Service Overlay District provided that the <br /> proposed facility complies with the height restrictions of Section E.(6), and all of the <br /> setback and other regulations set forth in this section. <br /> (4) Any applicant must demonstrate that the proposed facility is necessary in order to <br /> :i provide adequate service to the public. <br /> r <br /> D. Location. <br /> Applicants seeking approval for personal wireless service facilities shall comply with the <br /> following: <br /> (1)If feasible, personal wireless service facilities shall be located on existing structures, <br /> including but not limited to buildings, water towers, existing telecommunications <br /> facilities, utility poles and towers, and related facilities, provided that such <br /> installation preserves the character and integrity of those structures. In particular, <br /> a <br /> 1 <br />